Convertible Waterproof Dog Walking Set
Built around one adjustable collar and one long, double-ended lead, this dog collar and leash set gives pet brands a practical alternative to a fixed-handle leash. The smooth coated strap handles wet pavements, muddy paths and routine cleanup, while contrasting connection tabs turn the hardware layout into part of the design.
One Lead, More Than One Handling Layout
A snap is fitted at each end of the leash, with intermediate connection hardware positioned along the strap. The approved ring and tab arrangement determines how the lead can be shortened, formed into a handle or configured for another carrying position.
Clip at Either End
Two swivel snaps make the leash reversible and allow either end to connect to a compatible collar or harness D-ring.
Set the Working Length
Connection positions can be sampled to create a conventional hand loop or a shorter control layout without adding a bulky padded handle.
Carry Small Walk Essentials
A selected ring can provide a convenient attachment point for a lightweight waste-bag dispenser. The dispenser is quoted separately unless specified.
Standard set shown
- One adjustable waterproof coated-webbing collar
- One 96 in × 0.75 in double-ended leash
- Coordinated contrast tabs, rivets and buckle components
Shown for context, not automatically included
- Dog harness
- Waste-bag dispenser and bags
- Custom retail box, hang card or display packaging
Choose the Collar by Neck Measurement
Measure around the dog's neck where the collar normally sits. Leave enough room for a comfortable fit, and select the larger size when the measurement falls between two ranges.
| Size | Adjustable Neck Range | Collar Width | Leash Size | Reference Max. Dog Weight |
|---|---|---|---|---|
| S | 9.5–14 in / 24.1–35.6 cm | 0.6 in / 15 mm | 96 in × 0.75 in / 244 cm × 19 mm | 35 lb / 15.9 kg |
| M | 11.5–18.5 in / 29.2–47.0 cm | 0.75 in / 19 mm | 96 in × 0.75 in / 244 cm × 19 mm | 50 lb / 22.7 kg |
| L | 15.5–24.5 in / 39.4–62.2 cm | 1 in / 25 mm | 96 in × 0.75 in / 244 cm × 19 mm | 80 lb / 36.3 kg |
Manual measurement may vary by approximately 1–2 cm. Weight guidance comes from the supplied reference chart; final suitability must also account for dog behavior, selected hardware, finished construction and the buyer's approved test standard.
Specify the Parts That Change Performance
The coating, core, snap geometry and attachment spacing should be signed off as one construction. For more material directions, compare iPeti's dog leash range and dog collar range.
Designed for Wet Walks and Fast Reset
Surface Water Resistance
The coated face does not absorb splashes like untreated textile webbing, making the set suitable for rainy commutes and damp outdoor conditions.
Low-Retention Surface
A non-porous finish helps limit moisture and odor retention. Wipe off loose dirt, clean with mild soapy water and air-dry before storage.
Two-Tone Shelf Identity
The main strap and smaller connection pieces can use coordinated or contrasting colors, creating a recognizable family across multiple SKUs.
Separate Hardware Decisions
Snap shape, plating color, rivets, D-rings and buckle components can be reviewed independently instead of forcing one fixed hardware package.
Turn the Reference Set into Your Own SKU
Use the sample as a construction starting point, then lock the visual and commercial details needed for your market. Exclusive artwork can also be assessed through iPeti's custom pattern service.
Color Pairing
Choose a main strap color plus a contrast color for tabs, keepers, rivets or buckle parts. Match against a physical sample rather than screen color alone.
Brand Placement
Review embossed, printed, engraved-tag or other compatible logo methods according to the selected coating and available branding area.
Snap & Ring Set
Select snap format, finish and intermediate connection points as a complete layout. Samples should confirm operation and hand feel.
Size Architecture
Keep the supplied S–L range or request revised neck ranges, widths and size labels for the destination market.
Collection Expansion
Develop compatible harness or waste-bag accessories as separate items when a larger coordinated walking collection is required.
Retail Presentation
Specify barcode labels, hang cards, pouches, gift boxes, carton marks and packing ratios after the final set dimensions are approved.
What to Inspect Before Bulk Production
A color match alone is not enough for this construction. The pre-production sample should make every connection point measurable and repeatable.
- Finished collar neck range and width by size
- Finished leash length, width and connection spacing
- Coating color, surface consistency and edge condition
- Buckle engagement, slider movement and collar adjustment
- Snap gate return, swivel movement and ring alignment
- Rivet head condition, placement and reverse-side finish
- Logo size, orientation, color and position
- Pull-test method and acceptance level agreed for the final build
Keep the Coating and Hardware Ready for the Next Walk
Cleaning
Wipe with a damp cloth or rinse away loose dirt. Use diluted mild soap when needed, then remove residue and allow the set to air-dry.
Routine Inspection
Dry metal parts after wet use. Before each walk, check the coating, rivets, buckle, rings and snap gates. Replace the product if a load-bearing part is damaged or does not close correctly.
This product is not chew-proof. Do not leave a dog unattended while tethered, and always connect the leash to a properly fitted collar or harness appropriate for the dog's size and behavior.
Questions to Settle Before Sampling
What is included in the standard product?The reference product is a two-piece set containing one adjustable collar and one double-ended leash. The harness and waste-bag dispenser shown in lifestyle imagery are not included unless they are added to the quotation.
Is the leash fixed at 96 inches?The supplied reference size is 96 in × 0.75 in (approximately 244 cm × 19 mm). Alternative dimensions can be reviewed, but changes may affect ring placement, handling layouts, cost and MOQ.
Does waterproof mean the entire set can stay wet?The coated strap is made for water resistance and easier cleaning. Metal and plastic parts still require normal care, and the set should be cleaned and dried after exposure to salt water, mud or chemicals.
Can the lead connect to a harness?Yes, a snap can connect to a compatible, correctly sized harness D-ring. A harness is a separately specified product and should be approved for its own fit, construction and load requirements.
Which elements can carry our branding?Depending on material and order configuration, branding can be evaluated on the coated strap, a logo tag, selected hardware or retail packaging. Artwork size and placement should be confirmed on a physical sample.
How are MOQ and lead time confirmed?They depend on coating color, size mix, hardware, logo process, packaging and order quantity. Send a quantity breakdown by size and color so iPeti can quote the exact build instead of applying a generic MOQ.
Request a Sample for Your Colorway
Send the collar sizes, order quantity by color, preferred snap style, logo file, hardware finish, packaging request and destination country. iPeti will use those details to confirm the feasible construction, sampling cost, MOQ and production schedule.
Send Your Product RequirementsHot Tags: waterproof dog walking set, China waterproof dog walking set manufacturers, suppliers, factory
