Close-fitting tracker holder
Reflective AirTag Dog Collar
A 2.5 cm adjustable nylon collar with two reflective lines, a soft neoprene lining and an integrated protective cover for a compatible tracker. The holder stays against the collar body instead of swinging from a separate clip.
HOLDER
Accurate product positioning
A Holder Collar, Not a Tracking Device
The product carries a compatible tracker on the dog's collar. Clear wording helps buyers distinguish the collar hardware from the electronic device and its location service.
What the Collar Provides
- An integrated circular cover that keeps the tracker close to the collar body.
- An adjustable 2.5 cm collar structure with a padded neck-facing layer.
- Two reflective lines that return light when illuminated.
- A buckle, adjustment slider and metal D-ring for the finished collar assembly.
What Requires Separate Confirmation
- The tracking device is not included unless it is specifically listed in the purchase order.
- The collar does not create GPS, Bluetooth or network service by itself.
- Location accuracy and connection depend on the device, account, network and environment.
- Tracker dimensions and holder retention should be checked on the pre-production sample.
Collar construction
Four Components, Four Separate Jobs
Instead of describing the collar with one general material claim, each layer and attachment point is defined by its function.
Woven Nylon Exterior
The single-face woven webbing provides the colored outer surface and supports the collar hardware.
Neoprene Inner Layer
A soft diving-material lining sits against the neck. Textile edging closes the padded collar body.
Reflective Yarn Lines
Two integrated lines reflect incident light. The effect is passive and is strongest when a light source reaches the collar.
Tracker Cover and Hardware
A molded protective cover, plastic buckle and slider, plus a metal D-ring complete the assembly.
Fit window
Select by Measured Neck Circumference
Both sizes use the same 2.5 cm width. Choose the size from the usable adjustment range, then verify buckle, slider and holder positions on the dog.
Place a soft tape around the area where the collar normally sits. Keep the tape flat and allow enough room for a comfortable fit.
Before orderingConsider coat thickness and seasonal changes. If the measurement is near the overlap between M and L, review the preferred hardware position rather than selecting from the letter alone.
After fittingConfirm that the tracker cover, adjustment slider and D-ring do not press into the neck or interfere with buckle operation.
| Size | Width | Adjustable Neck Range | Approx. Imperial Range |
|---|---|---|---|
| M | 2.5 cm / 0.98 in | 35–50 cm | 13.8–19.7 in |
| L | 2.5 cm / 0.98 in | 40–60 cm | 15.7–23.6 in |
* Dimensions are based on the supplied product information. Minor variation may occur with manual measurement. Confirm the finished usable range and agreed production tolerance on the approved sample.
Low-light detail
Two Reflective Lines Along the Webbing
Reflective yarn is woven along both sides of the colored collar face. When headlights, a flashlight or another direct light source reaches the webbing, the lines return part of that light and make the collar easier to notice.
Visibility note: reflective material does not produce its own light and cannot guarantee that a pet will be seen in every direction or condition. It should not replace lighting, supervision or other night-walking precautions.
Standard color directions
Nine Colors for Assortment Planning
The displayed range covers high-visibility shades, softer retail colors and neutral options. Physical samples should be used for final color approval.
Tracker-cover validation
Approve the Device Zone Before Bulk Production
The tracker cover is a functional component, so its dimensions and location should be checked separately from webbing color and logo appearance.
Define Device
Identify the compatible tracker model and confirm whether the device is supplied separately.
Check Housing
Review cover dimensions, opening direction, edge coverage and device insertion method.
Set Position
Confirm where the holder sits relative to the buckle, slider and metal D-ring.
Test Fit
Insert the intended device and examine retention during normal collar handling.
Record Sample
Use the approved component and placement record as the bulk production reference.
OEM order worksheet
Information to Confirm for a Custom Program
A complete purchasing brief keeps functional, visual and packaging decisions connected to the same sample.
For exclusive colors, logo placement or matching products, see iPeti's custom product development service.
Production checkpoints
QC Around the Collar and the Holder
The device cover receives its own checks in addition to the normal webbing, hardware and sewing inspection.
Care and responsible use
Remove the Electronics Before Cleaning
Collar Care
Remove the tracker from the cover. Wipe or hand-clean the collar with mild soap and cool water, then air-dry completely away from direct heat. Follow the electronic-device maker's care instructions separately.
Use and Inspection
Check the webbing, lining, holder, buckle, slider, stitching and D-ring before use. Stop using the collar if a component is loose, cut, cracked or deformed. Required load performance must be confirmed for the exact finished construction; the tracker holder does not replace a microchip, ID tag, secure enclosure or responsible supervision.
Buyer FAQ
Reflective Tracker Collar Questions
No. The standard product is the collar and compatible protective cover only. Any electronic device must be purchased separately unless the purchase order explicitly states otherwise.
Does this collar provide GPS tracking?No. The collar is a holder product and does not contain GPS, Bluetooth or cellular electronics. Tracking functions, accuracy and service availability come from the separately purchased compatible device and its platform.
What sizes are available?Both options are 2.5 cm wide. Size M adjusts from 35 to 50 cm, while Size L adjusts from 40 to 60 cm. Measure the dog's neck and verify the final hardware position before ordering.
What materials are used?The supplied construction uses woven nylon webbing, a soft neoprene or diving-material inner layer, textile edging and reflective yarn. It also includes a molded tracker cover, plastic adjustment hardware and a metal D-ring. Exact component materials should be recorded on the approved specification.
Does the reflective stripe glow by itself?No. The two reflective lines return light from headlights, flashlights or other direct sources. They do not emit light and should not be presented as a substitute for an illuminated collar or other low-light precautions.
Can the collar be customized for wholesale orders?Color assortment, logo method, hardware color, size mix and packaging can be developed according to the project. MOQ and lead time depend on the selected materials, custom components, branding, testing and packing requirements.
Related sourcing paths
Connect This Collar to a Wider Product Range
Send the Device and Collar Requirements Together
Provide the compatible tracker model, M/L quantity split, selected colors, logo method, hardware requirement, testing standard and retail packaging brief for project review.
Discuss Your Tracker Collar ProgramApple and AirTag are trademarks of Apple Inc. iPeti is not affiliated with or endorsed by Apple Inc. Compatibility must be verified with the intended device. Tracker sold separately.
Hot Tags: reflective airtag dog collar, China reflective airtag dog collar manufacturers, suppliers, factory
